Millboard Composite Decking FAQs
Millboard composite decking FAQs. Our decking boards are non-porous, which results in high resistance to algae growth, weathering & provides excellent anti-slip benefits. All of our products, which includes matching profiles and fascias; are scratch and stain resistant, making it a perfect choice for architects when looking for an innovative, beautiful alternative to timber decking.
Here are some of the most frequently asked question on Millboard composite decking by architects:
Where can I use Millboard?
Millboard composite decking is extremely versatile and can be used in practically every outdoor space to enhance decks, balconies, roof gardens, boardwalks, bridges, pontoons, seating, steps, planters and more.
Do I need to seal Millboard?
No, all Millboard composite decking is surface-sealed in the factory to ensure they arrive in premium condition. In the first few weeks of use, rainwater will sit on the surface in globules, but don’t worry – this is normal and will stop once the temporary surface seal breaks down.
Can Millboard be cut just like wood?
Millboard can be cut with standard saw blades, although we recommend a carbon-tipped, multi-purpose chop saw. As the formed end of the board is lost when cut, these can be placed in less visual areas against a wall or edging profile. Matching Touch-up Coating for exposed ends is available to buy separately.
What fixings should be used to fit Millboard?
Following extensive trials, we recommend and supply Durafix® stainless steel screws, designed specifically for Millboard. There’s no need to pre-drill or countersink Millboard, and the unique Lastane® material self-heals, leaving only a virtually indistinguishable mark on the surface.
What sort of spans should I use between Joists?
400mm centres for residential applications, 300mm centres for commercial and public realm applications. Millboard decking will cantilever over the end of a joist by a maximum of 50mm.
Can you screw fix it like you can with wood?
Yes, it will fix down with screws just like wood will, but without the possibility of splitting. We only Warrant the use of our Millboard ‘Durafix’ screws as these are the only screw that give a satisfactory hidden ‘Lost Head’ effect.
Can you use normal wood working tools?
Absolutely, no specialist wood working equipment is needed, you can even saw it by hand. As with all products that create dust when working with them we recommend, dust bags on saws and dust masks to be used in the control of dust. Gloves should also be worn.
Can the Millboard system be used on a flat roof?
Yes is the easy answer, determine what method of construction has been used for solid wood or concrete slab roofs with a mineral finish. Use our ring supports or joist shoes to position the joists where slope of roof is gentle enough to not be a concern. For a single ply membrane roof use our adjustable self-levelling head pedestal systems to spread the load preventing any point loading, both products will raise the joists above any standing water, prolonging their life while also acting to reduce sound transfer. Both products encourage the free flow of water on the roof membrane.
Will it fade over time?
Millboard composite decking has a very high resistance to fading, this is because it contains no wood fibres which typically fade and leave tannins.
Can I butt joint board ends tight to the next decking board?
You can do because the expansion and contraction is minimal, the butt joints should be positioned in conjunction with recommendations contained in the installation guide. A maximum of 2 butt joints before a gap of 2-3mm is desired.
Can you use it for load bearing applications (i.e. structural)?
It is not recommended to use Millboard in structural applications; Millboard decking would need to be fixed to a structural frame, either made of timber or ‘Plas-Pro’ recycled plastic.
Can you paint / stain it?
No, it is not needed! Millboard composite decking is designed as an ultra-low maintenance product and paints and stains will not adhere permanently to the surface of the Millboard in most cases. Clients choose the colour they desire based on the knowledge they won’t have to coat it to keep its colour.
Can you bend it?
Millboard composite decking boards won’t bend across their width, but curves can be created by using the flexible edging profiles and fascias.
How does the price compare to softwood?
Initially, it is more expensive than softwood decking, but similar in price to a high quality hardwood. What you must remember is that the subframe material and installation are comparable to traditional decking so the labour cost remains similar. Also due to the reduced maintenance requirement, the life cycle cost of Millboard composite decking is considerably less than that of softwood decking. It is a much superior quality material to softwood and it is uniform, whereas softwood decking may be warped, contains knots and is inconsistent in density. It’s the perfect alternative decking product.
What material is used for the sub structure?
The cheapest option (applicable to free draining, relatively dry conditions only) is to use treated softwood. The softwood sub structure will obviously decay over time, and may not last as long as Millboard could do. Alternatively we also supply our non-rotting Plas-Pro recycled plastic sub structure system, which is far superior and useful in damp conditions or areas with low air circulation.
Does it become slippery when wet?
Millboard decking has achieved the highest accreditation for anti-slip composite decking in the world! As it is resistant to hosting algae growth and has a textured ‘Lastane’ surface material it is naturally low-slip.
How easy is it to clean?
Once the decking has been installed and after the initial ‘after installation’ clean down there will be very little maintenance required. As the surface is non porous – dirt, food and drink spillages do not become absorbed, unlike timber. The simplest way to clean the deck itself if it is really needed is to use soapy water and a brush. It can be cleaned down with a power washer, on low power, if required but this should never really be needed
All types of Millboard composite decking has been tested by BBA, certificate 17/5409 for use as Decking Boards and certification and testing has been to this end.
Millboard has been tested to BS EN ISO 13501-1:2007+A1:2009 and has a Bfl-S1 reaction to fire classification (fire test for flooring). Millboard is not recommended for use as cladding on buildings 18m (6 storeys) or above, and for other cladding use, it should be subject to Building Regulations to check suitability, use and proximity.
For a full Fire Safety report go to https://www.millboard.co.uk/downloads/
Can you recommend an installer?
A nationwide network of Approved Installers of Millboard Composite Decking are available – . Chosen for their professionalism and high quality, you should always follow normal precautions before entering into a contract with a third party, especially if a deposit payment is required.
For any other technical, installation or care questions, go to our contact page, call our technical team on 024 7643 9943, or email us at email@example.com
Enhanced Grain Composite Decking – as good as wood?
Real wood decking is beautiful. With its natural knots and grains, it can really change the look of an outdoor space. But how does it match up to composite decking?
With wood being a naturally formed material, this means it requires a high level of maintenance. It can quickly become weathered, become slippery when wet and pose other issues such as rotting, fading and absorbing stains.
During the winter months, fungus often meets wet wood. The tannin in the timber reacts and forms a horrible black stain. This is often a sign you’re heading for rotten decking, and can damage the timber beyond repair. Natural wood can also fade and warp – leading to additional future costs on replacing or repairing some or all of your decking.
So why is our Enhanced Grain Composite Decking as good as wood?
In our opinion, it’s even better!
Our Enhanced Grain collection is moulded from selected real wood timber. This enables us to make this range of Millboard look just like the real thing – utilising the style and design that you can only find in natural wood.
The natural design is then teamed up with all of the exceptional benefits that Millboard provides.
Millboard composite decking is designed to specifically withstand outdoors elements – whether that’s good or bad weather, rain or shine. The Lastane® surface layer not only provides a high resistance to UV light, but also provides an anti-slip surface – even when wet.
As Millboard Composite Decking is made from a unique polyurethane resin blend, this non-pourous material resists any kind of moisture, algae, stains, mould or impact.
The features of Millboard combined provide the benefits of safety and cost saving, without the need to maintain the decking as you would do with real wood. And with our Enhanced Grain Composite Decking, visually it looks just as (if not better) than the real wood.
Hand moulded composite decking for your next project
Why choose hand moulded composite decking: Because Millboard is a unique non-wood decking which perfectly replicates the visual appeal of natural timber, it can boast superior performance. Hand-moulded in durable polyurethane, it has superior safety features with higher anti-slip ratings than conventional composite decking. The distinctive look of Millboard takes skill, impeccable attention to detail and patience to achieve.
Our director, Jerry, handpicks each timber personally, sifting through hundreds of specimens until he finds the winning combination of characterful grain and distinctive knots. We’ve gone to extraordinary lengths to seek out these original masters, often chancing upon them in the most unlikely places. The 100-year-old oak used to create our beautiful Weathered collection, was found in the rural countryside and originates from the floor of a French railway carriage. We were granted special permission to take moulds from these distinctive pieces of wood, which now form the basis of a truly unique decking material.
So, if you are looking for an alternative decking solution, you can find out more about our unique Composite Decking here.
The best composite decking? Millboard of course!
What is the best composite decking – and is it as good as wood? With Millboard you can enhance any residence with durable flooring that is as functional as it is beautiful in appearance. Millboard provides an authentic wood-look surface which is slip-resistant, easily cleaned of food and drink stains, and usable all year round.
We believe the best composite decking is Millboard, the leading brand for style-conscious property owners, developers and architects looking for a premium decking material. Retaining its outstanding beauty for decades and boasting amazing resistance to food and drink stains, Millboard is the ultimate outdoor floor surface for high-end socialising, all year round.
All of our composite decking boards boast the natural beauty of real timber with the high performance of our unique wood-free material. Millboard is non-porous, which means high resistance to algae growth and excellent anti-slip properties. All of our boards, which includes matching profiles and fascias; are scratch and stain resistant, making it a perfect choice for homes and commercial settings, when looking for an innovative, beautiful alternative to timber decking.
Millboard is available to buy from stockists across the UK. Our Key Distributors are carefully selected to ensure a positive purchasing experience, and are able to offer helpful advice and recommendations in store. Use the search tool on the page link below to locate your nearest stockist, or call our sales team on 024 7643 9943 to identify the best one for you.
The Millboard Team